Bankruptcy Among Youth - 1748 Words

1.0 Introduction Bankruptcy becoming the issues toward many youth nowadays. The worst is the bankruptcy was involves with many youth where below than age 30. According to Credit Counselling and Management Agency in New Straits Times (2011), an average of 41 Malaysians are declared bankrupt daily, with the majority failing to make repayment for car purchase loan. In short, the problem of bankruptcy among youth has to be taken seriously. 2.0 Problem Statement Statistics by the AKPK indicated that the number of individual bankruptcy cases had raised by 11.2% to 18,053 cases in 2010 and increased by a further 6.2% to 19,167 cases in 2011 (Curbing Credit Card Abuse, 2012). According to a survey by the Education and Research Association for†¦show more content†¦In that connection, financial illiteracy can lead to making poor financial decisions that can have adverse effects on the financial health of an individual (Hallman amp; Rosenbloom, 2000). 6.1.5 Medical Expenses Medical expenses refer to any expenses incurred by individuals due to health care costs and it usually involved high cost. For example cost for medicines, treatment, surgery, premium for health insurance and other related costs. 6.2 Summary of Previous Study 6.2.1 Loans According to Haini Hassan Deputy Director-General Insolvency Department (2012) from the statistic make by the Bank Negara the car loans is the top list of the reason bakruptcy followed by personal and housing loans. In addition, she added that the credit card debts made up the other major causes of bakruptcy. Similary, Bank Negara Malaysia (2009) cited in Malay Mail Insight stated that 3548 people declaring banruptcy due to the credit card debt whereby 1780 people belong to those aged 30 and below. 6.2.2 Unemployment A survey conducted by Deborah Ralston, Rosalind Mason, amp; Jaynendra Kumar(2001), the major self-attributed causes of consumer bankruptcy in 1998-99 were unemployment and it cause 38% of consumer bankruptcy in 1998-1999 which is major self attributed. Similarly, J. Zywicki (2004) found that the first, high levelsShow MoreRelatedBankruptcy Among Youth5014 Words   |  21 PagesMalaysia. They need to be survived and struggle in order to be useful to this country. However, Malaysian youth are becoming increasingly reckless with spending especially by the convenience offered by credit card. It is due to the desire to purchase everything that they want making them easily to involve with the loan. As the result, many youth where below than age 30 were involves with bankruptcy. According to Credit Counseling and Management Agency in New Straits Times (2011), an average of 41 MalaysiansRead MoreThe Assessment Of Yakima County1562 Words   |  7 Pages Yakima County is geographically very unique. The county is located in south central Washington State among seven neighboring counties. Its geography consists mainly of rolling foothills and fertile valleys. Agriculture is the main producer in the county’s economy and, according to the Yakima county economic profile, Yakima is the second largest county in Washington state at 2.75 million acres. Concerning health in Yakima County there are three major issues that stand out. The percentage of peopleRead MoreThe Affects of the United States Economy1195 Words   |  5 Pagesup after a sluggish 18 months (Mississippi Business Journal, p.7). Consumer spending had a tremendous grow since the recession started. One of the areas that consumers are spending their money in is the youth furniture department. According to Furniture-Today (2008), â€Å"Consumer spending for youth bedroom furniture is expected to grow by 23.5% in the next five years, with sales to reach $6.3 billion by 2012.† In conclusion, our small and big business are starting to see the light at the end of theRead MoreEssay on Casinos1252 Words   |  6 Pagesbanks but will rarely admit that it is for gambling. They will borrow theirselves into bankruptcy. In South Dakota, the state has experienced increases in chapter seven bankruptcies. But personal debt is by far not the only problem for compulsive gamblers. In the same two years the bankruptcy increased in South Dakota, the number of divorces increased nearly 6 percent. Also, child abuse and neglect are high among the crimes that compulsive gamblers commit. A study of the impact of casino gambling onRead MoreHeathcliff Character Analysis1700 Words   |  7 Pageshim to elevate himself from humble beginnings daily the fame of a rich gentleman, however his want everyday revenge himself for Hindley’s abuse and Catherine’s betrayal leads him into a twisted life of cruelty and hatred; Catherine is day-to-dayrn among her love for Heath cliff and her desire every day be a gentlewoman, and her choice every day marry the genteel Edgar Lindailyn drags nearly all of the novel’s characters inday-to-day struggle with Heathcliff The regular emphasis on landscape in theRead MoreStudent Debt And Its Effects On Students847 Words   |  4 Pagesenormous, far larger than credit card debt. It s a trap for the rest of your life because the laws are designed so that you can t get out of it. If a business, say, gets in too much debt, it can declare bankruptcy, but individuals can almost never be relieved of student debt through bankruptcy. This compelling statement was made by American activist, linguist, journalist and philosopher, Noam Chomsky. On the topic of student debt, I realize that it is by far one of the most largest and most considerableRead MoreHuman Rights During World War I And II909 Words   |  4 Pagesunderstanding from person to another, even if they live in the same region and under the same circumstances. During world war I and II, there were enormous losses of human life and rights such as discrimination, intolerance, injustice, oppression (Youth for Human Rights International, 2001). 10,000 ye ars in the past, some slaves were an essential part in people s civilization such as Greece, Rome, Medieval Europe and West Africa. The buyers made the slaves do anything they wanted, to clean, to cookRead MoreCauses Of Homelessness1405 Words   |  6 Pagesfor people who had mental illnesses, it is such a huge challenge to get back to their normal lives. Many studies have reported that the prevalence of mental illness and cognitive disability is higher among homeless individuals compared to the general population, and the rates of mental illness among the homeless population have recently increased. In the article â€Å"Causes of homelessness prevalence: Relationship between homelessness and disability†, the author compares the causes of homelessness andRead MoreThe Great Depression and Unemployment: Discussion Questions1271 Words   |  5 Pagescountries. Among various other reasons, economists, researchers, and historians cite the Black Tuesday (October 29, 1929) as the biggest cause of the Great Depression. It was the day on which the stock market crashed. A massive number of individuals, business corporations, and banking companies had invested huge amounts in stocks. In order to survive from heavy loss, everyone hurried to sell its stocks, but there were no buyers. The banks went bankrupt and further increased panic amon g individualsRead MoreThe Rising Costs Of Formal Education1649 Words   |  7 Pages American youth have more pressure to get a good education than ever before, but at what price? The cost of education is at an all time high and rising every year. Many Americans are struggling with a large amount of student loan debt weather they graduated with a degree or not. The only way to secure the future of students today is to invest in the students themselves rather than investing their money into the corporate market. By preparing students for higher education and providing financial

My Personal Experience Of God - 2177 Words

Describe your personal experience of God and the understanding of God you derive from biblical, theological and historical sources. I was born in South Korea between my father who was skeptical and my mother who was faithful for believing God in the Korean Methodist Church. For this reason, it was natural for me to attend a Korean Methodist church. At that time, I did not know what the church is doing and why I should attend the church, but what I learned about church was what I am redeemed by Jesus Christ through God’s love in the bible class. The church was just a place where I could meet friends, rather than understanding who God is. Nevertheless, someday, I recognized what I have a curiosity about who God is through My mother’s†¦show more content†¦Moreover, he was crucified because of pardoning our sin. I know this stories about Jesus, but, at that time, Jesus existentially came to me as the incarnation. I realized that Jesus Christ is my lord but also sin cere friend as he came down to Zacchaeus in the plan of God. This is my experience of and understanding God and God’s love. What is your understanding of humanity and the human need for divine grace? I believe that human beings, who have the image of God, are the best creature in the world. Therefore, they can instinctually recognize the existence of God and have capacities to choose somethings and to create somethings creatively. For John Wesley, human beings are created by God in the image of God, which means that they have similar characteristics to God. Scott J. Jones insists, â€Å"we share God’s nature in that we are immortal spirits who have various divine capacities: understanding, freedom of the will, and affections.† In this view, in the beginning, the human beings have capacities not only to understand God in the communication between God and them, but also to choose and do anything which they want. However, at the Fall, their characteristics given by God became malfunctioned by Adam’s exploiting their free will not obey God, but disobey God, which generates the original s in. John Wesley explains about this in his sermon ‘The New Birth,’ â€Å"The natural consequence of this is that everyone descended from himShow MoreRelatedMy Personal Experience Of God2602 Words   |  11 Pages ¶ 324.9a - Describe your personal experience of God and the understanding of God you derive from biblical, theological, and historical sources. My personal experience of God is based on my life experiences and a personal relationship with Jesus Christ. I have experienced God’s presence in my life and I have felt the Holy Spirit guiding me. I first felt God’s call as a teenager and prayed that one day I would become a pastor. But my new Christian faith was not strong enough and I soon succumbedRead MoreMy Personal Experience Of God7569 Words   |  31 PagesDisciplinary Questions – Part I Describe your personal experience of God and the understanding of God you derive from biblical, theological and historical sources. I have a personal relationship with God the Father through the redemptive power of Jesus Christ and the keeping power of the Holy Spirit. I spend time daily in prayer, meditation and reading of the scriptures. My understanding of God is found in The Apostle Creed which states: I believe in God, the Father Almighty, maker of heaven andRead MoreMy Personal Experience And Understanding Of God1722 Words   |  7 PagesMy personal experience and understanding of God has resulted from what God has revealed to me. F. Belton Joyner, Jr. says, What we know about God is what God has revealed to us. Over the course of my life God has been revealed to me through God s love and grace. When I was twelve years old, I accepted Jesus Christ as Lord and Savior of my life. In the years prior, God was continually drawing me closer to God, even before I was aware I needed God. We are made aware of our need for repentance throughRead MoreThe United Methodist Church’s Book of Discipline Essay1 169 Words   |  5 PagesThe United Methodist Church’s Book of Discipline states, â€Å"Wesley believed that the living core of the Christian faith was revealed in Scripture, illuminated by tradition, vivified in personal experience, and confirmed by reason†. This statement outlines the concept of the Wesleyan Quadrilateral. Interestingly, John Wesley never actually used the term â€Å"quadrilateral† and the American Methodist scholar, Albert C. Outler, who later stated that he regretted doing so as it has been misconstrued, namedRead MoreThe Argument From Religious Experience1460 Words   |  6 PagesReligious Experience The argument for God, based on personal Religious experiences, is an argument that cannot be refuted by others. While others may not have the ability to prove the existence of God, through another’s experiences, they also cannot disprove this existence. A person’s personal experiences are something that no other person can determine, nor argue. My experiences are my interpretations for the occurrences within my life, therefore, another person cannot determine what my true experiencesRead MoreA Personal Relationship With Jesus1520 Words   |  7 Pageshe Origin of a Personal Relationship Concept â€Å"Personal relationship with Jesus.† Being an Atheist, I’ve had hundreds of arguments with Christians about Jesus and religion in general. No matter what evidence I provided, the Christian always seemed to bypass it with the Personal relationship cop out. They would tell me they don’t practice religion, and that they have a personal relationship with Jesus. They would insist that I take five minutes of my time at night and call on Jesus while I’m allRead MoreMy Personal Christian Worldview1439 Words   |  6 PagesMy Personal Worldview My personal Christian worldview is full of heavy doses of God, and plenty of drizzles of the Bible, and it was born from a combination of how I was raised, my life experiences, and my assumptions. This worldview is heavily involved as I bring up my children to love God, and do my best to be a good wife to my husband. Most of all, this combination has filled my heart and soul with the conclusion that God is my all! I was raised in a Christian home where my parents taught God’sRead MoreA Summary On Charismatic Faith And Ministry1693 Words   |  7 PagesCharismatic Ministry. Here Thimell continues his systematic approach to the book, but now switches to the rest of the story, the work of the Holy Spirit in our lives today. Thimell takes a very academic and cerebral approach to the gospel. His lack of personal encounters and stories are evidence to that fact. However, this is a refreshing approach that presents the gospel with just the basic facts and not many frills. I believe that Thimell’s purpose in writing this book was not to give an exhaustive bookRead MoreThe Spiritual Discipline Of Practicing The Presence851 Words   |  4 PagesChristward direction, constantly being thankful and doing everything for God. This reflective essay will cover numerous aspects of the spiritual discipline of practicing the presence, including my original understanding, a significant Christian historical figure, and denomination comparison. Furthermore, different personal experiences of practising the presence, specifically individual, group and corporate, as well as a reflection on my original ideas and closing with ways to encourage practising the presenceRead MoreBruce Almighty Reflection1001 Words   |  5 PagesPeople usually think that for God to speak to a person it has to be something completely extraordinary, however this is not the case as you can find God in all things. To understand the benefits and drawbacks of extraordinary and ordinary more clearly, contemporary examples such as movies, novels, or personal experiences are very useful. The movie Bruce Almighty is an example of a way God can reveal himself in an extraordinary way. The main character, Bruce, is an egotistical news reporter who seems

Career Episode Free Essays

LAST NAME: FIRST NAME: MIDDLE NAME CAREER EPISODE No. 1 PIRANHA HANGAR BASE CONSTRUCTION PROJECT Place in Colombia INTRODUCTION 1. This first episode is based on my experience as Project and Quality control Manager for the project related to th construction of two piranha hangar base. We will write a custom essay sample on Career Episode or any similar topic only for you Order Now This project was executed by XXX, the Company which I worked for, and the Contractor was the ZZZ. This construction project took place from August 2004 to August 2005. BACKGROUND 2. The main scope of this project was to build two hangar bases for â€Å"piranha† motor boats. These hangar bases provided different facilities to military personnel that need some support during their military operations and each one had fuel storage and supply facilities, warehouse, dinning and temporary housing facilities . Thus, it was necessary to build a potable water system, sanitary system, fuel storage and distribution system, air conditioning system, bilge and ballast system, electrical network, including generator set. Hull, deck and roof structure were built on steel structure with different specs and coating schema. Each piranha hangar base weighted 209 tons and had two storeys. 3. The Hull was composed by five pontoons each one of 8 meters length x 1. 20 meters width x1. 5 meters depth and a main section of 24 meters length x 3. 5 meters width x 1. 5 meters depth. Each pontoon had a specific function, pontoon number 3 was designed for sewage system, pontoon five was used for ballast system and included sea box. Inside other pontoons there were installed pipe lines for fuel, sanitary, electrical, bilge and ballast system. Hull main section was designed to fuel and LAST NAME: FIRST NAME: MIDDLE NAME potable water storage. On second floor, there were located facilities for housing, office and nursery. . The main existing problem for this project was that the hangar base had to be fabricated on site since transportation of an entire hangar base was impossible due to security conditions. ZZZ decided that this was a Best Value Proposal, which means that the selected constructor would be the company that guarantees the success of the project regardless the price. The company had to define and support not only an economic and technical proposal but also a real proposal that analyzed and guaranteed quality, transportation and security/safety factors. This proposal also had to include a fabrication plan at Bogota and an on-site, transportation plan and on-site assembly plan. The contractor also had to outline an integral plan to perform assembly on-site and furthermore pinpoint which equipment would be used in pre-assembly and joint nine heavy steel modules. PERSONAL ENGINEERING ACTIVITY 5. During the bid process, I was an active member of the technical team which defined technical solution, including hull modules definition, fabrication and assembly plan at Bogota and on site. This technical team was composed (in hierarchical order) by my boss Eng. XYZ, who is the general manager of the Company, me and a group of external specialists from different fields e. g. structural, naval and mechanical engineering . In this stage, I was in charge of coordinating equipment to define an integral solution and based on conclusions of the technical team meetings, I did relevant documents such as fabrication and assembly plan, transportation plan, Quality control plan and technical proposal, including project schedule. Final proposal presented by ZZZ was composed of two main stages. The first one was fabricating at Bogota, LAST NAME: FIRST NAME: MIDDLE NAME he hull (pontoons and main hull) and processing steel plates and steel profiles, including sandblasting and coating process. Second stage was transport these steel modules by air and joint them at project location. After a meeting, in which I had to explain and support designed plans to ZZZ, they fortunately decided that our proposal was the best option for them, so the Company was selecte d as the contractor for the construction of two Piranha Hangar Bases and then it started a new process, which was related to the construction of the project according to proposed plans. . For this construction stage, my job description was that of Project and Quality Control Manager . The following were my main functions: 6. 1 ENGINEERING ACTIVITIES : Supervising and ensuring that each activity was performed according to drawings and specs. This activity was performed throughout the entire process, including construction stage. Supervising steel structure fabrication process. Hull modules were fabricated on a Steel Structure shop located at Bogota . These modules were pre-assembled here in Bogota to guarantee that it would not be any problem at the place. All welding procedures of hull modules were tested by a company which is certified to verify and qualify welding quality and procedures. Steel structure was sent to the place with primer and barrier coating; final coating was applied on site . This decision was taken for two main reasons. Firstly, at the place relative humidity level is extremely high, so quality of coating activities could not be guaranteed; furthermore, sand blasting procedures could LAST NAME: FIRST NAME: MIDDLE NAME not be done at the places due to its cost and environmental regulations. Selecting Test Company to perform and control quality of main. I also supervised and ensured that welders were certified by an approved organization. Ensuring welding activities, pipelines and equipments performed at optimal level. Sought materials and equipment needed by the project and assured that those fulfilled requirements established by ZZZ. Once I had identified the supplier for equipment and/or materials, I gave the info to the Purchase Department of the company and they performed the acquisition and coordinated delivery procedures. This procedure was under my supervision and I had to be informed about purchase and delivery status. When the supplier was located out of the country, purchase procedure was my responsibility from beginning to end. This meant that I had to define right supplier, perform importation and nationalization process and coordinate process until its delivery on-site. Writing technical reports that were required by client. Guarantying to client that all activities were performed according to submitted plans. Supervising that those activities were performed fulfilling requirement of Quality Control Plan. Simulating behavior of each piranha hangar base according to hull construction and specific loads. This procedure was very interested since I learned new things related to vessels . For this activity I was supported by Eng. Y who is a Naval Engineer from the National Navy and he really taught me a lot about this subject, we use a special software that LAST NAME: FIRST NAME: MIDDLE NAME simulated vessel behavior according to its own weight, tide level, bilge and ballast tank level and specific conditions that could affect hangar base stability. 6. 2 MANAGEMENT ACTIVITIES : Controlling execution budget. Controlling project progress and project schedule. Controlling reports that were required by ZZZ, such as daily reports, Man hour report. Writing and preparing submissions of materials, equipment or procedures which must be submitted to ZZZ and must have its approval. It was a key issue since ZZZ approval took about 30 days and activity could not be started if all the related submittals were not approved. So, any mistake or delay on this activity could significantly affect the progress of the project. Calculating and supporting payment request. Attending meetings requested by client, in order to support project and its progress to ZZZ. Defining and requesting to human resources department required labor to work on site. 7. Eventhough assembly on site was easier than the one that we had planned; there was a problem with the structure designed and built to maneuver steel modules into the water. At the beginning this structure was composed by steel truss and pulleys; however due to weather reasons we required a fast method; so I proposed and built a series of roller boards which were fabricated on AC SCH 40 pipe which was the only strength material available on-site at this stage of the project. It was a good idea. The success of this project was due in part to the rainy season as water level had significantly increased, and so steel modules LAST NAME: FIRST NAME: MIDDLE NAME were close to low-lying land, reducing transportation and handling distance of big steel modules from work area to river. SUMMARY 9. For the successful execution of this project it was important to have create and maintain good team work. Since this project included different fields of engineering and it was mandatory to have positive communication between site engineer, subcontractors and specialists in order to avoid any mistake. The entire roject was performed and completed amidst a healthy working environment. 10. The project was very interesting because it required technical and managerial abilities . It was a personal challenge because it was my first project not only with the company but also with the ZZZ. They have a quality system that really does not make many mistakes and they also have documentation systems and procedures that takes time and cannot be underestimated during the planning process. 11. Our proposal was the best for them; I think that they had some doubts about air transportation and assembly on site of prefabricated modules. Thus, at the beginning, they were extremely dedicated to this project and when they realized that the entire hull was floating on the river, they were proud of their decision. Project fulfilled ZZZ requirements; it was given additional execution time since it was an unexpected rainy season. 12. I think that my role contributed to the project, since I was in charge of key activities and any mistake could dramatically influence the project and its objectives. I realized that I have leadership abilities and that projects could seem complicated but when a project has drawings, specs, LAST NAME: FIRST NAME: MIDDLE NAME a good quality control system and good team work anything is possible. This project was also interesting because it had special equipment that had to be bought in the USA; there was an armor steel plate that was bought in Peru so I learned how to do international purchases and nationalization procedures. 13. In addition, I had to constantly coordination with other departments and gave technical support to the site team, duties that were new to me. It was an important episode in my career and has helped to develop my knowledge base, experience, skills and confidence. LAST NAME: FIRST NAME: MIDDLE NAME CAREER EPISODE No. 2 DESIGN AND CONSTRUCTION FOR MIDNIGHT EXPRESS FACILITIES Place – Colombia INTRODUCTION 1. This episode is related to my job as Project Manager and Quality control Manager for the design and construction for midnight express facilities at Place (Colombia), which is a Pacific coast city. 2. This project was executed by XXX, the Company which I worked for, and the Contractor was ZZZ. This project took place from July 2006 to March 2007. BACKGROUND 3. The first main objective of this project was to provide, at pier zone, fuel, electricity and water to midnight express patrol boats. Fuel was provided from two storage tanks 5000 gallons ea. located at 984, 25 feet away from pier location. Electricity had to be taken from a generator set located at the same distance and water was taken from a storage tank located at 1. 640,42 feet away from pier. These pipelines had to be underground and at pier zone they had to be anchored to concrete structure and protected against sun and bumps. Second objective was to install infrastructure necessary to install a jet dock system which is a floating dock system that works according to tide level of fluctuating waters. This floating dock was 45,93 feet length per 29,53 feet width and was composed by cubes of surface area of 20†³ x 20†³ (500mm x 500mm) , 14 pounds (6. 4 kgs) weight, and over 200 pounds (90 kgs) of buoyancy. The cube was air filled (basically a rigid, hollow compartment) with a wall thickness of approximately ? † (6mm). LAST NAME: FIRST NAME: MIDDLE NAME . In order to accomplish this second objective, a special design was created since this jet dock system had to be anchored to existing concrete piles which were not totally aligned with Y-axis nor designed to loads and movements transferred by floating dock and midnight express boats. 5. It is important to note that at this Pacific area, tide levels vary from 1 to 19,69 feet daily; this data was obtained by using Marina records and by doing meas urements each hour during six months which were recorded and analyzed in excel. So it was very difficult and complex to design a system that worked according to this tide level variation and that were strong enough to support wave forces and directions. 6. In addition, infrastructure included a floating steel platform that was moved according to tide level and that was used as pedestrian access to the jet dock floating platform. It was necessary to design and built a fiber glass floating unit that was used as guide to the steel platform. At the existing pier, there were installed two dockside pillars which supplied electrical energy and water to midnight xpress boats. Fuel was supplied by two fuel pumps. 7. The scope of this Contract had two main activities: Design and Construction. This kind of contracts with ZZZ is very important and requires special attention from Contractor Company. Design procedures have three submittals: Submittion #1: 50% Design submission Submittion #2: 90% Design submission and 100% Design submission Each one of these documents must be submitted to ZZZ in order to have their approval . This approval takes 30 calendar days, and no work on site LAST NAME: FIRST NAME: MIDDLE NAME can be started if final submittal has not been approved; thus, any mistake in these documents will carry out a delay on execution time. PERSONAL ENGINEERING ACTIVITY 8. At the Design and Construction stage my job position was Project Manager and Quality Control Manager and I was in charge of representing the company during project execution, approving or disapproving executed activities, preparing and submitting payment request, Maintaining updated submission register, preparing and signing daily report . If any work had not been performed according to specs and/or technical code I had authority to reject the work and to define corrective actions. 9. I also coordinated and supervised the Project, assured that the work was properly scheduled, assured that costs were being properly controlled and maintained and an efficient safety program was in place. 10. The Design team was composed by a Structural Engineer, an Electrical engineer and me. I was in charge of this team and I coordinated and supervised their work. I also designed hydraulic network and environmental system. I was an active member of this team and my work was reported directly to Eng. W, who is the general manager of the Company. Once specific design had been done by each external specialist, I reviewed those and if requirements were fulfilled, I prepared design submissions, which included drawings, calculations and specs and submitted it to ZZZ for their revision and approval . These specs were done using SpecsIntact program, which is an specialized software created by ZZZ to edit and create technical specs according to scope and conditions of specific project. LAST NAME: FIRST NAME: MIDDLE NAME 11. In order to do environmental design I first defined two main criteria. 1) The not treated water quality and 2) the use of treated water and required quality. 12. For determining water quality I based my analysis on lab results for well located near the project area. And for the second aspect and according to specs the required treated water quality was determined based on the following uses: †¢ †¢ †¢ Water not apt for drinking Water apt for human contact: Activities where human skin came in contact water Fresh water washes activities to retire marine salt from non sensible materials that do not require being washes with demineralized, distillate water or with more physical and chemical quality than potable water. 13. After these criteria had been defined ,treatment plant capacity was calculated based on the estimated operation flow, maximum 0. lps, storage volume of 1000 gls (according to SOW), and critical conditions or maximum consumption; the storage volume would be consumed in 1. 75 hours. I determined that the well must supply the consumed water at the same rate, which is 0. 6 lps, to assure water supply at all times. Thus, I selected a treatment plant of 0. 6 lps. 14. According to the water quality expected and its final use , the treatment to be used included the following processes: †¢ †¢ †¢ Ventilation1 ventilation tray set Flocculation and Coagulation :1 coagulation and flocculation tank Sedimentation1 sedimentation tank LAST NAME: FIRST NAME: MIDDLE NAME 4. The Hydraulic design was done using the Hazen-Williams equation with a roughness coefficient C = 150 for PVC pipes and according to the International Plumbing Code 2003. It was not difficult to develop the networks design due to all of the input parameters were known, so it was make the calculations according to the design process and fulfilling the international standards requirements. 15. The challenge for this project was to design a system easy to assembly and guarantee that materials would resist sea environment and fluctuating water forces. Works must be performed on the sea and on a rainy season. For these reasons materials and procedures had to be carefully selected, reviewed and approved. 16. By analyzing information given by surveying methods, existing piles were not aligned; they did not have a common axis . Thus, in order to prevent damage in jet dock system, it was mandatory to create something that fixed the jet dock guides in the same X and Y axis. Since the jet dock system required poles to let floating board to move according to tide level, I thought that it would be a good idea if these poles had horizontal members as long as it was required to absorb X-Y axis variations. To achieve this purpose, I suggested steel guide poles, instead of PVC guide poles which were recommended by Jet Dock supplier; in addition, this material would guarantee a stronger structure, able to support wave forces. 17. At the bottom section, these guide poles were fixed to existing concrete pier by fabricated steel clamps plate 1/8â€Å"(height= 1,6404 feet) jointed with O1† screws and at top section they were anchored to existing concrete pier beam by using adhesive mortar for rebar and anchor LAST NAME: FIRST NAME: MIDDLE NAME fastenings. These guide poles and their supports were prefabricated and preassembled at Bogota, Colombia. 18. On site it was difficult to install these guide poles, since their length was 22,97 feet, tide level would be, as minimum one meter above guide pole anchor system. Thus, this anchorage activity had to be performed with specialized diving people that guarantee that screws were installed according to Torque requirements. 19. It was an interesting experience because, even though it was an easy project, there were many difficulties that could influence the overall quality of final product. Thus, it was necessary to have good specialists for each field. In addition, on site was a senior engineer who had great experience regarding coastal projects, so his knowledge was very useful in solving specific problematic on-site details. SUMMARY 20. I learned new things which related to projects surrounding coastal environments. Overall, in order to do the job properly, a number of variables had to be considered. 21. All the construction procedures were defined throughout design activities; since I did not have knowledge about ea water behavior and how waves and tides can impact in an on shore project, it was interesting to find that my proposed ideas were accepted without hesitation. Since I was in charge of key activities and any mistakes could affect the project, I worked effectively and diligently to ensure the smooth completion of the project and to ensure client satisfaction. The ZZZ and YYY were satisfied with the project and the installed equipment. LAST NAME: FIRST NAME: MIDDLE NAME CAREER EPISODE No. 3 DESIGN AND CONSTRUCTION FOR CONCRETE RECYCLING SYSTEM Bogota, Cundinamarca – Colombia INTRODUCTION 1. This episode is based on my experience as Project Manager for the project related to the construction of infrastructure required at a concrete recycling system RRR ® at Precast Concrete Plant COMPANY at Bogota, Colombia. This project was executed by XXX, the Company which I worked for, and the Contractor was COMPANY which is a National Precast Concrete Manufacturer. This construction project took place from December 2007 to March 2008. BACKGROUND 2. Precast concrete plant required an integral solution to solve the final disposal of residual concrete . They did not have space nor adequate treatment for this material. In addition, the concrete plant did not have a drainage system so rain water got mixed with wash water and water produced by daily operation and maintenance of proper equipment and concrete mixers. This water used to be accumulated at lowest areas creating different environmental and operational problems, such as floods, visual and soil pollution. Due to these conditions, COMPANY decided to install a recycling RRR ® system, which offered the complete solution not only for reclaiming aggregates and cementitious water for reuse in the production process but also for treating excess water. LAST NAME: FIRST NAME: MIDDLE NAME 3. A recycling system provides a closed loop system and consists of a reclaimer and a system to reuse the water. With a recycling system the sand and aggregates as well as the greywater are reused in the batch plant. There was no material leftover to dispose of and therefore a zero discharge solution. 4. This water is treated in a way that enables clear water to be available after the process and can then be used within the factory . The accruing sludge can be used in the batch plant to provide a closed loop system. 5. The objective for this project was to build several civil works such , Rigid pavement including granular as :Reinforced concrete tanks for storage of clarified and greywater, foundation for RRR ® equipment layers, potable water network , electrical network, drainage system and environmental works like grease / oil trap and sand trap treatment . 6. As project manager, my work was supervised by Eng. M who is the owner of the company and I reported every subject related to project performance to him and the general manager of the Precast Concrete Company. PERSONAL ENGINEERING ACTIVITY 7. At the beginning of the project we had a general drawing given by RRR ® system supplier. This drawing was a layout drawing that indicated general dimensions / distances and water and electrical supply network requirements. The first activity that I had to do was locating RRR ® infrastructure inside the general layout of the concrete plant which had existing facilities including cement and aggregates bins, office building, warehouse and a maintenance shop. Thus, I had to define a RRR ® LAST NAME: FIRST NAME: MIDDLE NAME ystem location analyzing existing facilities and parameters like flooding areas, maneuver distances and turn radius. 8. After the suggested location was approved by Client, it was mandatory to improve draft drawings given by machine supplier. Therefore, the second activity was to define maneuver area, pavement slope, drainage system location and grease/oil trap and sand trap treatment location. Once these criteria had been defined by me and approved by the general manager of the Precast Concrete Company ,I designed each one of these items . . For designing a drainage system I analyzed two main water sources; rain water which was calculated by using Rational method and wash water which was calculated by direct measurement and according to number of loaded cars per day. For Rainfall intensity I used pluviometric Record located at the project area. Since water had sediments, I designed a system based on reinforced concrete open channel in order to facilitate maintenance operations. Q: c: i: A: Flow (m3/sec) Runoff coefficient Rainfall Intensity (m/sec) Catchment Area (m2) Q = c ? i ? A Rational Method 10. To design grease / oil trap I used flow calculated in previous stage and used a retention period of 20 mins which is the one suggested by National code for Hydro sanitary Activities (RAS) . 9. The company for whom I worked, started the construction of the project according to design drawings. I supervised each activity and ensured performance was carried out in accordance with drawing specifications given by RRR ®, who was the equipment supplier. I also LAST NAME: FIRST NAME: MIDDLE NAME Coordinated and supervised the Project performance, Assured that the work was properly scheduled and that costs were being properly controlled. 10. My work fulfilled project requirement. This could clearly be noted when equipment and recycling systems arrived from Germany. Everything meant my requirements and the installation process went smoothly. Drainage and treatment system were an integral solution to existing water problems reducing flooding areas. 11. Throughout project execution it was not technical difficulties, assembly on site was easy and there no were required any extra works or any modification SUMMARY 12. For the execution of this project it was very important to have good client communication. Positive team work transpired throughout the entire project and this and this affirmed and aided the constructive client communication. Overall I believe I was a good project manager, both from the client perspectives and from the workers perspective. 13. The project was a success and I believe that success was and is a reflection of my capabilities. The project was very interesting because it required technical and managerial abilities. It was a personal challenge because it was the first recycling system in my country. There was little technical expertise and know how available to assist me and few knowledgeable people to go to for advice. I had to use my own initiative to get the job done successfully. LAST NAME: FIRST NAME: MIDDLE NAME 14. I think this project has been one of the biggest challenges of my professional career thus far. I had to develop an important design project in a short time and without previous experiences about RRR system. In addition I had to constantly coordinate with other departments and give technical support to the site team, duties that were new to me. It was an important episode in my career and has enabled me to gain much knowledge as I had little previous experience in many of the areas I encountered. This project enabled me to further my professional knowledge base, expand my technical expertise and develop my managerial capabilities. How to cite Career Episode, Papers

Woman Question free essay sample

In the eighteenth and nineteenth centuries, many European women were still struggling for basic rights such as choosing who they married, obtaining full citizenship and having the right to vote. Because so many women were fighting for the same thing, many formed groups or alliances that were designed to fight against the male-driven political parties that wanted to deny them their rights. As the â€Å"woman question† became a bigger deal in politics and society, people began to form stronger opinions about whether or not they thought women should be allowed to vote. The eighteenth century in Europe began a revolution on the topic of women’s suffrage. An overwhelming amount of feminist groups argued for women’s suffrage and fought against the leading political parties to voice their opinions and try to incite change in the European governments. Starting in the eighteenth century, women and a few men like John Stewart Mill began fighting for more women’s rights and women’s suffrage in Europe. We will write a custom essay sample on Woman Question or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page John Stewart Mill believed that the institution of the family was very corrupt because it was based on subordination and suppression of women. He believed that letting women vote would promote social strength and a moral regeneration (Document 1). Female political activist also fought for women’s rights by saying that, if women are nearly half of the population, excluding them from voting was a complete contradiction to the idea of universal suffrage (Document 2). Continuing with the idea of the expansion of universal suffrage, many people argued that allowing women to vote would broaden the base of democracy and weaken the traditional vices in European governments (Document 4). Many feminist groups emphasized the connection between domestic politics, society and the government. If women aren’t allowed to vote, they lose control over their domestic responsibilities as well and the high-class society begins to slip away (Document 5). The idea that social and political roles of women were very much connected allowed for a steady argument in favor of women’s suffrage. Allowing women to vote would also allow for new ideas and could open new doors for the government and begin a change for the better (Document 9). People also believed that allowing women to vote would be the political step that could help to tear down social barriers as well. Women’s suffrage would lessen or eliminate male superiority and therefore lessen the limits that were put on women’s educative and professional opportunities (Document 10). People fought for women’s suffrage because they believed it could open new doors politically as well as allow women to grow and contribute socially and economically to society as well. In the eighteenth and nineteenth centuries there were many groups and organizations that fought for the right for women’s’ suffrage, however there were just as many who also fought against them. Many men that were already involved in the government were opposed to women’s suffrage because they feared that it would lessen their power and diminish the importance of their vote. They also believed that, since women weren’t actively involved in the political process, they were receiving new and updates from second hand sources. These sources could then influence the woman’s decision and would cause women’s suffrage to be an unfair advantage for a certain political party (Document 3). Many people also argued that their home and family was their â€Å"domestic sanctuary† and without the stability of a non-political woman in the house, war could break out. This caused people to immediately believe that involving women in politics would lead to war (Document 6). There were also women who believed that women’s suffrage was a bad idea. They believed that, because they knew first had that women were emotional and quick to jump to conclusions, women would make quick and rash decisions that would not be good for the government (Document 7). There were also the people who believed that women were the inferior gender and were therefore weak and unable to handle the stress and difficulty involved in politics and the government (Document 11). Some people also argued that women were not supposed to be involved in politics because it was not socially acceptable. They said that women were supposed to be loved and kissed and not forced to handle the struggles of making hard political decisions (Document 12). People who argued against women’s suffrage believed that women were too weak and delicate to handle the ups and downs of political involvement. Women’s suffrage was a major discussion point in the eighteenth and nineteenth centuries and many people had very strong feelings about whether or not women should be allowed to vote. People for women’s suffrage believed that allowing women to vote would open new doors for the government and lead countries in the right direction. However, the people who fought against women’s suffrage believed that women were too weak, emotional and irrational to make beneficial decisions that had their government and country’s best interest in mind.